PRODUCTS
Kingda pump
/
/
M (R) KSL series light slurry pump
No content information display available
Please add data record on website background.

SAUNDERS

WRITE A MESSAGE TO US

Username used for comment:
客户留言
Description:
验证码
 M (R) KSH series heavy duty slurry pump
M (R) KSH series heavy duty slurry pump
M (R) KSH series slurry pump is a new generation of heavy-duty slurry pump developed by our company on the basis of digesting and absorbing the imported ah series products, combined with our more than 70 years of slurry pump design and manufacturing experience and using advanced design means. It completely covers ah series products in terms of performance, with higher efficiency and better suction performance. It has the characteristics of high efficiency and energy saving, low vibration, low noise, reliable operation, long service life and convenient maintenance.
 ZGB (P) series high lift slurry pump
ZGB (P) series high lift slurry pump
Double pump casing structure. It has the characteristics of high lift, high efficiency, good wear resistance, stable performance and good cavitation performance. The lining and impeller materials are made of wear-resistant metal. The pump outlet direction can be installed and used at eight different angles with an interval of 45 °. The pump and driving machine can be driven by direct coupling, hydraulic coupling and reducer. The impeller can also be cut to meet different performance conditions. The shaft seal can adopt packing + auxiliary impeller combination seal or mechanical seal. The bearings are lubricated with thin oil and equipped with two sets of water cooling systems for bearing cooling. The rotation direction of the pump is clockwise from the driving end. It can be connected in series at multiple levels.
 KSHF (KSF) series foam slurry pump
KSHF (KSF) series foam slurry pump
According to the structural form, it is divided into vertical KSF and horizontal kshf structures, all of which adopt double pump shell structure. The vertical KSF structure does not need to be sealed, and the material box can be lined with rubber; Horizontal kshf structure has small installation space and can transport larger flow; The impeller of horizontal KSHF foam pump is specially designed, and the blade is extended and contacted with liquid earlier, which has better inhalation performance. The pump and driving machine can be directly connected and driven by V-belt. The shaft seal can adopt packing seal, auxiliary impeller seal or mechanical seal. The rotation direction of the pump is clockwise from the driving end.
 M (R) KSS series submerged slurry pump
M (R) KSS series submerged slurry pump
It is suitable for conveying submerged, abrasive, coarse particles and high concentration slag slurry in metallurgy, mining, coal, electric power and other industries. Without shaft seal and shaft seal water, it can work normally under the condition of insufficient suction. Such as slurry transportation under immersed liquid in metallurgy, mining, electric power, steel plant and chemical industry.
  KSG series gravel pump
KSG series gravel pump
This series of pumps are of single-stage, single suction, cantilever and horizontal structure. The pump body, pump cover and adapter plate are connected by clamps. Grease lubrication is adopted. It is mainly used for the transportation of strong abrasive materials whose particles are too large to be transported by general slurry pump. The pump and drive machine can be directly connected, V-belt drive, hydraulic coupling drive and reducer drive. The pump has the advantages of 360 ° abrasion resistance and convenient installation in any direction. The inlet of each type of pump is horizontal. From the transmission direction, the pump rotates clockwise or counterclockwise as required.
 Wn (q) series dredge pump
Wn (q) series dredge pump
The structure of this series of pumps is simple. The dredge pump with diameter below 500wn adopts the horizontal structure of single pump shell and single-stage single suction cantilever. According to the connection mode of gearbox, two typical structures can be provided, that is, the self-contained bracket type is combined with the pump box, the self-contained bracket type lubrication mode is grease lubrication or oil lubrication, and the shaft seal adopts mechanical seal or mechanical seal and packing composite seal. The WN type cabin pump of dredging pump with diameter above 600 adopts the horizontal structure of double pump shell, single-stage and single suction cantilever, with its own bracket, and the lubrication method is forced thin oil lubrication; Wnq underwater dredging pump adopts single pump shell structure to reduce the pump weight and facilitate lifting and movement. All diameter dredge pump shaft seals can adopt spiral sleeve L-shaped rubber seal. The sealing device is composed of three L-shaped sealing rings and a threaded shaft sleeve. In order to improve the service life of shaft seal, sand water separator can be equipped to ensure the quality of shaft seal water.
 TLR series double shell desulfurization pump
TLR series double shell desulfurization pump
This series of desulfurization circulating pump is of horizontal, axial suction, single-stage, single suction, suspension and rear suction structure. The double-layer shell is lined with replaceable wear-resistant rubber specially developed for the working condition of desulfurization slurry. It can also be made of polyurethane. It has the characteristics of high efficiency and energy saving, corrosion and wear resistance, low vibration, low noise, reliable operation, no leakage of shaft seal, long service life and convenient maintenance.
 TL series single shell desulfurization pump
TL series single shell desulfurization pump
This series of desulfurization circulating pump is of horizontal, axial suction, single-stage, single suction, suspension and rear suction structure. The material of single-layer shell and flow passage parts adopts kb09 specially developed by our company for desulfurization conditions, which has the characteristics of high efficiency and energy saving, corrosion and wear resistance, low vibration, low noise, reliable operation, no leakage of shaft seal, long service life and convenient maintenance.
 KWp series non clogging centrifugal pump
KWp series non clogging centrifugal pump
This series of pumps are horizontal axial suction, single-stage, single suction and single pump shell structure. The main features are high efficiency and no blockage. The impeller has a variety of options such as open, semi open, closed and free flow. The complete varieties and specifications also provide a wide range of flow and head. The appropriate pump type can be selected according to the user's specific purpose and operating conditions.

Kingda pump group Xingtang Pump Co., Ltd 

Kingda Pump Industry Group Co., Ltd

Add:Xingtang County, Shijiazhuang, Hebei, China
Tel:
0311-85426662/6661
Fax:0311-85426671
Mail:info@kingdapump.com

这是描述信息
©2021 Kingda pump group Xingtang Pump Co., Ltd
Power by: 中企动力

SEO TAG

kingda pump